Stream Self Priming Pump 1"x1", 0.75HP, 46L/m, 55mH STPS70
Model: STPS70 (single phase)
Self-priming pump with peripheral impeller (Jet Pump)
Applications and Installation
- Self-suction pumps, with peripheral impeller containing numerous radial blades in its edge.
- Self-priming because of the particular design of the pump body which is with a small tank, water is threw outwards by centrifugal motion caused by the impeller. Then the water rotates with the impeller, generating high pressure.
- Applicable to supply water from well, pool and so on, increase the water pressure in the pipe garden sprinkling or clean washing.
- Pumps should be installed in a covered area, protected against the weather.
Construction Features
- Pump Body: cast iron
- Motor Housing: aluminum
- Shaft: 45# steel/stainless steel
- Impeller: brass
- Motor: closed, externally ventilated
- Insulation Class: B/F
- Protection Class: IP44/IP54
- Duty: continuously rated
- Mechanical Seal: ceramic steatite/ metalized carbon
Operating Limitations
- Max ambient temperature up to 40°C
- Max fluid temperature up to 80°C
- Max pressure up to 10 bar
Specifications
Size Discharge | 1' x 1' |
Power | 0.75HP / Single phase |
Flow Rate | 8 ~ 46 L/min |
Head | 55 ~ 10 meters |
Manometric Suction Lift | Max. 7 meters |
Liquid Temperature | Max. +80°C |
Environment Temperature | Max. +40°C |
Dimensions (L x W x H) | 276mm x 175mm x 213mm |
Weight | 10.8 kg |