Stream High Flow Pump 2"x2", 1.5HP, 580L/min, 13mH CS150/2
Model: CS150/2 (Single phase)
High flow rate centrifugal water pump 580L/m with medium heads 13mH.
Applications and Installation
- Specifically designed to achieve high delivery rates with low to medium heads for industrial and agricultural uses.
- Their volute impeller makes it able to pump water that is even fairly dirty.
- High delivery rates under continuous or heavy duty, making them advantageous for rain and gravity irrigation, for pumping water from lakes, river, well and for a wide variety of other applications, etc.
- Pumps should be installed in a covered area, protected against the weather.
Construction Features
- Pump Body: cast iron
- Motor Housing: aluminum
- Shaft: 45# steel/stainless steel
- Impeller: brass
- Motor: closed, externally ventilated
- Insulation Class: B/F
- Protection Class: IP44/IP54
- Duty: continuously rated
- Mechanical Seal: ceramic steatite/ metalized carbon
Operating Limitations
- Max ambient temperature up to 40°C
- Max fluid temperature up to 80°C
- Max pressure up to 10 bar
Specifications
Size Discharge | 2' x 2' |
Power | 1.5HP / Single Phase |
Flow Rate | 100 ~ 580 L/min |
Head | 13 ~ 9 meters |
Manometric Suction Lift | Max. 7 meters |
Liquid Temperature | Max. +80°C |
Environment Temperature | Max. +40°C |
Dimensions (L x W x H) | 380mm x 195mm x 260mm |
Weight |
21 kg |